Airgun Pistol High Pressure Air Pump Electric Air Compressor 30mpa 4500psi Description: This Product Is Compact, Compact and Portable, Temperature Display, High-pressure Exhauster Integrated Design; Battery Driven, Fast and Fuel Saving; the Operating Temperature of the Machine Is Displayed, and the Temperature of the Machine Is Monitored in Real Time; Built in Cooling Fan, Large Area Hollow Shell, Effective Heat Dissipation; the Fuselage Is Equipped with a High Hardness Plastic Handle, Which Is Light and Easy to Carry; Easy to Filter and Maintain. Specifications: Voltage: 110 V / 60 Hz Power: 300 W Power Supply: 12v Car Battery ( 30 + a ) Working Pressure: 0-30 Mpa Maximum Pressure: 300bar / 4500psi / 30mpa Oil-water Filter: Exist Cooling System: Two High-power Fans Oil or Water: Neither Need Shut off: Manually Product Size: 21.5 * 17.2 *13.2 Cm Packing Size: 35 * 30 * 25 Cm Product Weight: 5.2 Kg Packing Weight: 7 Kg Applications: Suitable for Most Air Guns and Paintball Hpa Tanks Filling Speed: 0.5l, 0 to 300bars, Needs 20 Minutes Around. 200-300bars, Needs 8 Minutes Around Features: Compact Structure: Compact and Portable, Temperature Display, Integrated Design of High Pressure Air Pumping Machine. Battery Drive: 12 Power for Vehicle Use, 30mpa Fast Gas Saving and Convenient. Temperature Digital Display: Machine Running Temperature Display, Real-time Monitoring of Machine Temperature. Manual Shutdown: the Power on and off Buttons Are Configured on the Side of the Fuselage, Which Is Simple and Easy to Operate. Efficient Heat Dissipation: Built in Cooling Fan with Large Area Hollow Shell, Effective Cooling. Portable Handle: the Body Is Equipped with High Hardness Plastic Handle, Lightweight Design, Easy to Carry. Easy Filtration: with External Oil-water Separation Filter, Easy Maintenance. First Use Steps : 1 . Check the 110v Ac Voltage Set on the Converter 2 . Connect the Power and Air Hose 3 . Turn on the Cooling Fan 4 . Tighten the Bleed Valve to the Right 5 . Start the Compressor Notes : The Inflation Pressure Should Be less Than30mpa. Do Not Over-inflate Your Air Gun . The Duty Cycle Is : Continuous Inflation for 25minutes and Rest for 10 Minutes If the Temperature Reachs 80 Degrees , Please Stop Filling and Keep the Fan Running to Dissipate Heat Tighten the Bleed Valve Before Inflation , Loosen It After Filling Completion to Release the High-pressure Air in the Hose , and Then Disconnect the Air Gun . Always Turn on the Cooling Fan First and Turn off Last . Keep the Cooling Fan Running Until the Compressor Cools Below 50c Packing List: 1 X High Pressure Air Pump 1 X 110v to 12v External Power Adapter (the Input Voltage Has Been Set to 110v and the Portsare Connected to Wires . All Left to Do Is Simply Inserting .) 1 X 12v Car Battery Charger 1 X Oil Water Separator 1 X Manual Instructions On Nov 28, 2023 at 18:47:58 PST, seller added the following information:
Returns Accepted for this item if it's within 30 Days